ALPHA evo
Selfpropelledz 3500 / 4100 / 5100 L. 24 – 44 m. TWIN FORCE / DELTA FORCE / ALU
Overview
Ergonomics, Visibility and Optimization
ALPHA evo features a fine balance between front and rear and has a low total weight giving an optimal
weight/capacity ratio and high performance even under wet field conditions. Also the high ground clearance from 120 to 165 cm gives a flexible usage from low to tall crops as sweet corn and sunflowers.
Chassis
The chassis is made of high tensile steel (DOMEX® Swedish steel) and consists of U-shaped beams with riveted cross-members to offer lightness and flexibility.
Cabin
The cabin is equipped with a pressurisation system, a dust filtering of fresh air, an aerosol and vapor filtering to protect the driver and fulfill the Class 4 requirements.
Electronics
All the main spray functions are at your fingertips. The multi-function joystick in conjunction with the 12.1” touchscreen provides the HC 9600 user with the highest level of performance available.
Engine / Transmission
Engine and exhaust aftertreatment (EAT) is optimised for highest total system efficiency and thus ensure minimised fuel and total operating costs.
WorkZone
All primary functions needed to operate the sprayer if not from cabin when filling or cleaning have easy access located in the centre of the WorkZone
Booms
The biggest challenge is timing due to weather conditions. Let’s take control. With the HARDI TWIN system, air will help you control the wind. You are in control of the speed and angle giving you the possibility of covering the whole plant, from top to bottom.
Get the ALPHA evo brochure
See all the information about the ALPHA evo including full specifications, in-depth information and much more!
Optimizes visibility with 3-pillar design
The new large spacious EvoCab II is specifically developed by HARDI with its “3-pillar design”, which provides a new standard for visibility with more than 320° around the sprayer.
The cabin is equipped with a pressurisation system, a dust filtering of fresh air, an aerosol and vapor filtering to protect the driver and fulfill the Class 4 requirements.
The new climate control system has been tested intensively in climate chamber in order to bring highest driver comfort in warmest condition.
FloatRide Suspension
By equipping the ALPHA with the optional FloatRide, the standard coil spring suspension is replaced by airbags. This ensures even more boom stability and maintains balance of the ALPHA in strong slope. The chassis’ height will be maintained whatever tank volume.
By allowing for individual wheel movement, the ALPHA provides a maximum comfort, even at high spraying speeds through a wheel travel of 185 mm.
Hydraulic Track width Adjustment
The ALPHA evo EcoDrive with FloatRide suspension can be equipped with Hydraulic Track width Adjustment. This Hydraulic Track width Adjustment axle allows a track width from 180 to 280 cm (depending on tire dimensions).
The driver will set his track width from the cab display and will be ready to drive. This will allow changing track width from the road to the field and from cereal crop to maize, row crop or vegetable with a variation of 1 m between minimum and maximum.
Specifications
| Tank, l | 3500 | 4100 | 5100 |
|---|---|---|---|
| Pumps, type – l/min | 464/10: 280(540) – 464/12: 334 (540) | 464/10: 280(540) – 464/12: 334 (540) | 464/10: 280 (540) – 464/12: 334 (540) |
| Booms | ALU, TWIN FORCE | ALU, TWIN FORCE | ALU, TWIN FORCE |
| Engine Deitz 6 cyl. 217 hp / 160 kW (Stage IV / Tier 4f / Tier 3a) depending on country regulation | Basis | Basis | – |
| Engine Deitz 6 cyl. 245 hp / 180 kW (Stage IV / Tier 4f) depending on country regulation | Optional | Optional | Basis |
| Hydrostatic 4-wheel transmission (29 or 40 kph) | EcoDrive Basis | EcoDrive Basis | EcoDrive Basis |
| Coil spring suspension | Basis | Basis | – |
| Pneumatic suspension FloatRide | Optional | Optional | Basis |
| Steering | 4-wheels steering | 4-wheels steering | 4-wheels steering |
| Mechanical track adjustment, cm | Basis, 40 cm slidding range | Basis, 40 cm slidding range | Basis, 40 cm slidding range |
| Hydraulic Track Adjustment (HTA) – electronic control 1.80 to 2.80 m (only with FloatRide) | Optional | Optional | Optional |
| Turning radius 200 cm track width (middle of chassis), cm | 462 | 462 | 530 |
| Weight (basis machine, empty)*, kg | 9.450 | 9.470 | 11.600 |
| Weight, front axle, basis machine in transport (empty)*, kg | 5.490 | 5.490 | 6.900 |
| Weight , rear axle, basis machine in transport (empty)*, kg | 3.960 | 3.980 | 4.700 |
| Total length*, m | 9.5 | 9.5 | 10.23 |
| Total height*; cm | 390 | 390 | 390 |
| Width with ALU boom (24-44 m), m | 2.55 | 2.55 | 2.55 |
| Width with TWIN FORCE (24 to 30 m), m | 3.00 | 3.00 | 3.00 |
| Width with TWIN FORCE (32 to 36 m), m | 3.34 | 3.34 | 3.34 |
| Track width manual slidding axle** (380/90 R46), cm | 182 – 329 | 182 – 329 | 182 – 329 |
| Track width HTA axle** (380/90 R46), cm | 180 to 280 | 180 to 280 | 180 to 280 |
| Wheel base, cm | 370 | 370 | 430 |
| Clearance (380/90 R46), cm | 120 | 120 | 125 |
| RinseTank, l | 410 | 410 | 600 |
| Fuel tank, l | 320 | 320 | 400 |
| Filling capacity water, l/min | 800 | 800 | 800 |
| Filling capacity TurboFiller, l/min | 120 | 120 | 120 |